PCMCIA External Hard Disk User Manual page 21

4. Wait for few seconds, Windows will find device driver from the diskette and install it
automatically. After the necessary files are copied into your internal hard disk, a screen will appear
as the figure shown on right, click Finish.
5. Windows will complete the installation and then detect the hard disk drive inside the external hard
disk kit and get it to work. After system read the content of the hard disk drive (about few seconds),
you will find a new drive letter has been assigned for the drive in 'My Computer'.
6. If the hard disk drive inside the kit is a whole new disk
drive that doesn't contain any partition, you can't
read/write data from/to it, please refer to the 'Partition the
External Hard Disk' chapter, to prepare your hard disk
drive.
Installed Device Drivers
PCMCIA HARDDISK (D6) (WINXP)
The real name of the hard disk drive inside the
kit
Location
Installed under 'SCSI and RAID Controllers'.
Installed under 'Disk Drives' (the name list in the
figure may differ from your hard disk drive).
- 15 -