PCMCIA External Hard Disk User Manual page 14

8. After the necessary files are copied into your
internal hard disk, a screen will appear as the
figure, click Finish.
9. Windows will complete the installation and then detect the hard disk drive inside the external hard
disk kit and get it to work. After system read the content of the hard disk drive (about few seconds),
you will find a new drive letter has been assigned for the drive in 'My Computer'.
10. If the external hard disk doesn't appear in 'My Computer' or doesn't work properly, please go into
'Device Manager' to check whether the devices are installed as the table and figure.
11. If the device driver already installed properly but the
hard disk still not present in 'My Computer', it means
the hard disk drive inside the kit is a whole new disk
drive that doesn't contain any partition, Windows
95/98 won't assign a drive letter for the disk drive
without any partition. Please refer to the 'Partition the
External Hard Disk' chapter, to prepare your hard
disk drive.
Installed Device Drivers
PCMCIA HARDDISK (D6)
The real name of the hard disk drive inside the
kit
Location
Installed under 'Hard Disk Controllers'.
Installed under 'Disk Drives' (the name list in the
figure may differ from your hard disk drive).
- 8 -