16.
Use the CURSOR PAD • or • to select the
A/V Receiver Source if you have connected the
Monitor Out and Optical Out to the A/V
Receiver. Select "Not Connected"
if not used.
17.
Use the CURSOR PAD •, •, • and • to
highlight NEXT, then press the SELECT button
to move on to the next step.
23.
Select "YES" to setup another device or select
"No, thanks, I'm done" to exit the AV Net
setup.
18.
If you would like to label your A/V Receiver
Source, use the CURSOR PAD • or • to
highlight "Yes", then press the SELECT button
to continue.
Selecting "No" will bypass the
Source Labeling.
Learning
Mode
(Example:
CUSTOM/DVD
3
Setup)
1.
Press the SELECT button to start the SETUP
WIZARD.
19.
Use the CURSOR PAD • or • to select your
A/V Receiver Sources.
20.
Use the CURSOR PAD • or • to label your
A/V Receiver Sources.
21.
Use the CURSOR PAD •, •, • and • to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
2.
Use the CURSOR PAD • or • to highlight NO.
3.
Press the SELECT button to select "NO".
(Select NO to setup other devices).
4.
Use the CURSOR PAD •, •, • and • to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
button to move on to the next SETUP screen.
22.
Confirm all settings, then press the SELECT
5.
CURSOR PAD •, •, • and • to highlight
"Custom",
then press the SELECT button to
select.
6.
Select NEXT to continue.
87