Advertisement
Your HITACHI Plasma Television is equipped with a G-LINK feature.
This connection is necessary for the TV
Guide On Screen
TM
system to work with your cable box to receive program listings and to enable VCR
recording features.
Once you setup the G-LINK (IR Mouse) connector, then you can use your HITACHI
Plasma TV Remote Control and the TV Guide On Screen system to control your cable box and VCR
recording features.
The Plasma Television Rear Panel has IR BLASTER/G-LINK
jacks.
One IR Mouse cable can connect up to
2 external Audio/Video
components.
Please see the following example of a G-LINK setup between your
HITACHI Plasma Television and external Audio/Video
equipment
(VCR and Cable box).
CONNECTING
THE CABLE BOX/VCR
TO GILINK
FOR TV GUIDE ON SCREEN
TM
SYSTEM
1.
Connect your external Audio/Video
components
to the Rear Panel shown below.
2.
Connect the IR Mouse cable to the IR BLASTER/G-LINK
output of the Rear Panel.
3.
Place the IR Mouse in front of the infrared sensor of the external components
you want to control.
I
A,R©
© CABLE
SU£W00FE8
OUT
_[r_Tl
ItJPOY_ INPUT3 INPUT4][ _ p ,_T=r
¥ ,,IDLO , ..............
..........................
_0_o @ (C@)iI(_)
"_'-
RS232C
1
r--
U
I
AAA
!!!!
[b ...... &l
pB/CB
pR,'OR R
@@@
4.
To access the TV Guide On-Screen
TM
system,
press the MENU button.
5.
Use the CURSOR
PAD •
or channel
scroll down
to highlight
TV GUIDE ON SCREEN.
6.
Press the SELECT or CURSOR
PAD • button
to
select.
7.
Follow the Setup
procedure
on pages 52-56.
23
Advertisement
