Advertisement
Audio
Source
Multi-Channel
Television
Sound will allow you to select STEREO
(a stereo
broadcast),
MONO
(monaural
sound)
used when receiving
a weak stereo
broadcast
or SECOND
AUDIO
PROG
(SAP) which may be a secondary
language,
weather
report, etc.
This function
is useful when setting
up the external speakers.
ON
Select this feature if using the internal speakers
only.
TV as Center
Select this feature when setting
up external
speakers
from a separate
stereo
system.
The
TV's speakers
will work as the center
speaker.
OFF
Select this feature if you prefer to use only speakers
from a separate
stereo system.
Auto
Noise
Cancel
This function
eliminates
the noise between
stations.
If a channel
is tuned
and is noisy, this function
will
automatically
eliminate
the audio for that channel.
Perfect
Volume
This function
will automatically
adjust volume
so each channel
and input has the same average
volume
level.
Loudness
Set this function
to ON to emphasize
bass and treble at low volume
levels.
Language
Some programs
transmit
more than one DTV language
option.
Most will have English as a default
language.
The
language
function
will allow you to select up to 4 language
options
(if available).
Digital
Output
This function
allows you to select between
Dolby ° Digital and PCM.
Dolby c°Digital - Select this feature
if the TV is connected
to an amplifier/receiver
with a Dolby '_ Digital only
decoder;
it will provide
six independent
soundtrack
channels
through
the optical
output
jack (Digital Audio).
PCM - Select this feature
if the TV is connected
to an
amplifier/receiver
with a PCM only decoder;
it will provide
two independent
soundtrack
channels
through
the optical
output
jack (Digital Audio).
DRC
Dynamic
Range Compression
- Use this function
to
compress
the range of sound volume.
By compressing
the
range of sound volume,
it is possible
not only to suppress
the output
of loud sound at night but also to raise the
volume
of low sound.
This is only effective
when the TV is
connected
via the optical
out (digital
audio) to an
amplifier/receiver
with a Dolby _ Digital decoder.
The
default setting
is ON.
Use the CURSOR
PAD ,4 or I_ to select the chosen
options.
Use the functions
at right if your TV is connected
to an
amplifier/receiver
with optical
digital
input with Dolby
Digital or PCM decoder
capabilities.
51
Advertisement
