Advertisement
®
®
LAST CHANNEL
(LAST
CH) button
Press this button to toggle
between
the current and
last channel
viewed.
VOLUME
(VOL) WHEEL,
MUTE
button
Use tile VOL WHEEL (A or Y) until you obtain tile
desired
sound level.
To reduce the sound to one half of normal volume
(SOFT MUTE) to answer the telephone, etc., press
the VOL wheel down. Press the VOL wheel again
to turn the sound off completely (MUTE). To
restore the sound, press the VOL wheel one more
time or VOL Up (A).
Press the channel
(CH) wheel to switch
to Favorite
(FAY) channel
mode.
You will know you are in
Favorite
Channel
mode when (FAV) is displayed
and the displayed
channel
is GREEN.
Press it
again to return to your regular tuned channels.
You
can add any channel
to your Favorite channel
list
by pressing
and holding
down the Channel
(CH)
wheel until the displayed
channel
turns from WHITE
to highlighted
GREEN.
You can also delete a
channel
from your favorite
channel
list by pressing
and holding
down the Channel
(CH) wheel until the
displayed
channel
turns highlighted
GREEN to
WHITE.
Closed
Captioning
will display
automatically
when
MUTE/SOFT
MUTE is on and Closed Caption
is set
to AUTO (see page 90).
When the TV power is turned off at a volume
level
31 or greater, the volume
level will default to 30
when the TV is turned on.
However,
if it is set to a
level 30 or less, the volume
level will be at the level
it was set when the TV is turned ON.
@
CHANNEL
(CH) WHEEL/CHANNEL
SELECTOR
buttons
The CHANNEL
wheel or the CHANNEL
SELECTOR
buttons
are used to select channels,
lock access
code, etc.
Use the CHANNEL
WHEEL (A or T) to
select the desired
channel.
Use the CHANNEL
SELECTOR
buttons
to enter one, two, or three
numbers
to select channels.
Enter "0" first for
channels
1 to 9, or simply press the single digit
channel
you wish to tune then wait a few seconds
for the TV to tune.
For Digital
Channels,
use the
CHANNEL
SELECTOR
buttons
with the (-) DASH
button.
Channel
selection
may also be performed
by CHANNEL
WHEEL up (A) or CHANNEL
WHEEL
down (Y).
(_
(-) DASH
button
Use the (-) DASH button
with the CHANNEL
SELECTOR
buttons
to enter Digital Channels
that
have subchannel
numbers
indicated
by (-) DASH
(example
15-1).
(_
BACKLIGHT
button
Press this button to light up and illuminate
the
buttons
of the remote control.
31
Advertisement
