Advertisement
8.
Use the CURSOR PAD • or • to choose the
brand name of your DVD.
9.
Press the CURSOR PAD • to highlight the IR
CODE Set, then use the CURSOR PAD • or •
to choose the preset IR Code.
10.
Use the CURSOR PAD • to highlight the "
POWER " Test button.
These On-screen buttons are called " Soft
Keys ".
11.
Press the SELECT button to pass the Power
command through the IR Mouse and onto the
DVD.
( Repeat steps 9 to 11 until finding the IR code
that will power up the A/V Receiver. If the DVD
turns ON, then you have found the correct
preset IR code ).
12.
Use the CURSOR PAD •, •, • and • to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
13.
Use the CURSOR PAD • or • to select the TV
Input that connects to the video and audio
output of the DVD.
14.
Use the CURSOR PAD •, •, • and • to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
16.
Press the SELECT button to select YES to
Setup another device.
Press the CURSOR
PAD • or • to highlight " No thanks, I'm done
", then press the SELECT button to exit the
A/V NET SETUR
Learning
Mode
This function
of the AV NET allows the user to use
equipment
that is not supported
by the AV/NET codes.
After programming
your equipment
to the AV NET and
the Soft Keys do not work, you can manually
"LEARN"
each one by completing
the Learning
Mode.
The
Learning
Mode will transfer any remote control
button
IR code of your equipment
to the "Soft Keys" of your
AV NET.
Learning
Mode
(Example:
A/V Receiver
Setup)
1.
Press the SELECT button to start the SETUP
WIZARD.
15.
Confirm all settings, then press the SELECT
button to move on to the next SETUP screen.
2.
Use the CURSOR PAD • or • to highlight
YES.
3.
Press the SELECT button to select.
4.
Use the CURSOR PAD •, •, • and • to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
85
Advertisement
