Advertisement
AV NET SETUP WIZARD
( Example:
A/V
RECEIVER
Setup)
1.
Press the SELECT button to start the SETUP
WIZARD.
10.
Use the CURSOR PAD _1, I_, • and • to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
2.
Use the CURSOR PAD • or • to highlight
YES or NO.
3.
Press the SELECT button to select "YES".
(Select YES to setup an A/V Receiver or NO to
setup other devices).
4.
Use the CURSOR PAD _1, I_, • and • to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
11.
12.
Use the CURSOR PAD _1 or I_ to select the TV
Input that connects
to the video and audio
output of the A/V Receiver.
Use the CURSOR PAD _1, I_, • and • to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
5.
Use the CURSOR PAD _1or I_ to choose the
brand name of your A/V Receiver.
6.
Use the CURSOR PAD _1, I_, • and • to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
13.
14.
Use the CURSOR PAD _1 or I_ to select the
A/V Receiver Source if you have connected the
Monitor Out and Optical Out to the A/V
receiver. Select " Not Connected " if not used.
Use the CURSOR PAD _1, I_, • and • to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
7.
Use the CURSOR PAD _1or I_ to choose the
preset IR Code.
8.
Use the CURSOR PAD • to highlight the "
POWER "Test button.
These On-screen buttons are called " Soft
Keys ".
9.
Press the SELECT button to pass the Power
command through the IR Mouse and onto the
A/V Receiver ( Repeat steps 7 to 9 until finding
the IR code that will power up the A/V
Receiver. If the A/V Receiver turns ON, then
you have found the correct preset IR code ).
83
Advertisement
