Advertisement
IR DEFAULTS
IR Defaults lets you modify
the channel
dialing defaults
if your cable box and/or VCR is not changing
channels
properly.
1, From the SETUP screen, use the CURSOR PAD •
to highlight Change Default Options and then press
the SELECT button.
2.
Use the CURSOR
PAD •
or •
to highlight
IR
defaults
and then press the MENU button
to
access the IR Defaults
Panel Menu.
Enter the chosen information in the Panel Menu
fields.
•
Cable box - if you have a cable box, indicates
whether
or not you want to modify
the default
channel
dialing
options.
Choices
are Yes and No (default).
°
Dial mode - select whether
you must enter 2-
digit or 3-digit
(default) channel
numbers
to
change channels
on your cable box.
°
Enter key - indicate
if you currently
press the
Enter key after you enter a channel
number
with your cable box remote.
Choices
are Yes and No (default).
°
VCR - if you have a VCR, indicates
whether
or
not you want to modify
the default
channel
dialing options.
Choices
are Yes and No (default).
•
Dial mode - select whether
you must enter 2-
digit (default) or 3-digit
channel
numbers
to
change
channels
on your VCR.
•
Enter key - indicate
if you currently
press the
Enter key after you enter a channel
number
with your VCR remote.
Choices
are Yes and No (default).
Press the SELECT button
to highlight
Done, and
then press the SELECT
button
to exit the menu or
use the CURSOR
PAD •
to highlight
Cancel. Then
press the SELECT button
to exit the menu.
70
Advertisement
