Advertisement
INPUT
ACCESS
This optional
feature allows
the user of the remote
control
to setup it's ENTER (ENT) button
to access the
specified
input of the T_
Setup
for this feature
is
applicable
to the remote control's
normal mode only
and only applies
to the DVD, CBL, STB, PVR and AMP
modes.
Select the desired
device mode (DVD, CBL, STB,
PVR, or AMP) by using your SOURCE
ACCESS
buttons
(, or 1_) to position
the LED indicator
to
the corresponding
selection.
2.
Hold down the ENTER (ENT) button
on the remote
and enter the four digit preset
code that
matches
your device as shown on pages 41-42.
3.
Then enter the assigned
input number
(1-5) that the
device
is related to.
4.
Release ENTER (ENT) button.
5.
If done correctly,
the device
LED indicator
will flash
3 times to confirm
proper setup.
6.
The remote will now control
the desired
device.
7.
Pressing
the ENTER (ENT) button
will now access
the video input (1-5) of the desired
device.
SETUP
EXAMPLE
(Hitachi
DVD with
precode
0573
connected
to iNPUT
1 of the
TV)
_'1_ Select
DVD mode by using your SOURCE ACCESS
buttons
(,
or I_) to position
the LED indicator
to
DVD.
_-_ Hold down the ENTER (ENT) button
and press the
numbers
O, 5, 7 and 3.
_
Then press the number
1 for the assigned
input
number of the DVD player.
_4_ Release ENTER (ENT) button.
If done correctly,
the device LED indicator
will flash
3 times to confirm
proper setup.
The remote will now control
the DVD player.
_._ Press the ENTER (ENT) button
to instantly
access
the video input of your DVD on Input 1.
®®®
H|TAOH|
40
Advertisement
