Advertisement
Operating
the precoded function
for your cable
box.
This remote is designed
to operate
different
types of
cable boxes.
You must first program
the remote to
match the remote system
of your cable box (refer to
pages 41-42 for pre-codes).
1.
Turn ON your cable box.
2.
Aim the remote control at the front of your cable
box.
To switch
to Cable (CBL) pre-coded
mode, use the
SOURCE
ACCESS
buttons
(,
or I_) on the remote
control
to position
the LED light to the
corresponding
selection.
Hold down the ENT button
on the remote and enter
the four digit preset code that matches
your cable
box as shown
on pages 41-42.
Release the ENT
button.
The indicator
light will flash 3 times if the
code was accepted.
Aim the remote at the cable box and press the
POWER button.
The remote will turn off your cable
box when the correct
four digit preset code is
entered.
When this occurs,
the remote control
is
programmed
for your cable box.
If the cable box
does not turn off, try a different
four digit preset
code.
6.
The remote will now control your Cable box.
TV
OVE
CBL
SEE
PVR
AMP
O
O
@
O
O
O
SOifRCE ACCESS
i:! ITACI-II
MY CABLE
BOX CODE
IS:
(_)
PRECODED
CABLE
BOX
buttons
These buttons
transmit
the chosen
precoded
cable
codes.
_)
EXCLUSIVE
TV buttons
These buttons
are for operating
the TV.
35
Advertisement
