Brother HL-5240 User Manual page 114
Hide thumbs
Also See for HL-5240:
- Service manual (337 pages) ,
- User manual (138 pages) ,
- Quick setup manual (23 pages)
Table of Contents
Advertisement
A,Appendix
Print surface
The characteristics
of the face side and reverse
side of a sheet of paper may vary a little.
Usually,
the opening
side of the ream of the paper package
is the print side. Follow the indications
on the
paper package.
Typically,
the print side is indicated
by an arrow.
Moisture
content
Moisture
content
is the amount of water left in the paper after manufacture.
It is one of the important
characteristics
of the paper. This can change greatly depending
on the storage environment,
although
usually
paper contains
about 5% water by weight.
Because
paper often absorbs
water, the amount of water can
sometimes
be about
10% in a high humidity
environment.
When the amount
of water increases,
the
characteristics
of the paper changes
greatly.
The fixing of the toner may become worse.
For storage
of the
paper and during use, we recommend
that the humidity
of the surrounding
environment
be between
50% and
60%.
Rough estimate
of basis weight
60
16
64
17
75
20
90
24
105
28
120
32
135
36
161
43
90
200
53
110
106 i
Advertisement
Table of Contents
