Advertisement
Available languages
Available languages
ALLURE ® QSE1 SERIES
RANGE HOOD
Page
5
OPERATION
LAMP REPLACEMENT
frm
light
Fan: The 3-position rocker switch (on the left) controls the fan.
The left position is low speed, center position is off, and right
position is high speed. An indicator light shows that the fan is on.
Light:
The 3-position rocker switch (on the right) controls the
lights. The left position is low light intensity, center position is off,
and right position is high light intensity.
LIGHT
LENS
CLEANING
_
WARNING: To reduce the risk of electric shock,
disconnect
from power supply before cReaning.
Aluminum mesh filters:
Clean frequently using hot water and
a mild detergent. Filters are dishwasher safe.
To clean hood:
Remove filters. Use a damp cloth and a mild
detergent to wipe all grease-laden
surfaces.
Use care when
cleaning fan blade - it must not become bent or misaligned.
DO
NOT ALLOW WATER TO ENTER MOTOR. Make sure all surfaces
are completely dry before re-installing filters and restoring power.
Motor is permanently lubricated. Do not oil or disassemble
motor.
Pull Tab
Lens forward and
down to
pull
on
remove
lens.
4W
NIGHT LIGHT
C-7 BULB
42W
FLUORESCENT
LAMP GX24Q-4
CAUTION:
Bulbs may be hot! Refer to bulb packag-
ing for further
information.
[_
Grasp _
at base, tilt down and pull out to remove.
Replace with 42W Fluorescent Lamp GX24Q-4._
uses 4W, C-7 bulb.
El
Replace light lens.
Advertisement
