Advertisement
Available languages
Available languages
ALLURE ® QSE1 SERIES
RANGE HOOD
Page 4
CONNECT WiRiNG
iNSTALL HOOD
WARNING:To
reduce the risk of electric shock,
make sure power is switched off at the service
panel. Lock or tag service
panel to prevent
power from being switched
on accidentally.
53
GREEN
GROUND
SCREW
El
Connect HouseWiring
(120 VAC) to hood. Connect house
black to hood black wire, house white to hood white wire,
and house ground under Green Ground Screw. Securely
tighten cable clamp onto house wiring.
Replace wiring cover.
KEYHOLE
(4)
MOUNTING
SCREW
(4)
Hang hood from (4) Mounting
Screws
(from parts bag).
Slide hood towards wall until mounting screws are engaged
in narrow end of (4) Keyholes. Tighten mounting screws
securely.
_
DO NOT PUSH ON FAN BLADE.
the
Pushing
on
blade may cause it to interfere with other hood parts.
DUCT
TAPE
[_
Connect ductwork to hood. Use
to make
Duct_
joints
secure and air tight.
Advertisement
