Connecting To A Pc - Windows Xp - UMC M19/20C-GB-TCDI-UK User Manual

19_22_20 english manual old 26.pPage 1 6. 5. 2009 15:25:16

Connecting to a PC - Windows XP

IMPORTANT— Before connecting to a PC you must ensure that the settings of the PCs
output are correct for the new LCD Monitor.
You need to do the following with your old monitor connected
1) Switch on your PC
2) When finished booting up, right click your mouse anywhere on the screen, the below
will appear
3) left click your mouse on Properties, this screen will appear
4) Check the screen resolution is set to what is shown in the technical specifications section.
26