Preparation; Before You Begin; Tools And Parts Needed; Parts Included - Bosch HBL33 Installation Manual

Hide thumbs Also See for HBL33:
Table of Contents

Advertisement

Available languages

Available languages

Preparation
Before you Begin
Tools and Parts Needed
Parts Included
Phillips head screwdriver
Measuring tape
Drill with bit (1/8")
Phillips head screws (6)
27" Appliances
General Information
Power Requirements
The outlet must be properly grounded in accordance with all applicable codes.
Dimensions for 27" Wall-Mounted
Units
24"
(610ram)
2413/16"
(718mm)
(630rnm)
.-_
27"
(686rnrn)
237/8" (606ram)
22" (559mm)
251/2"
m)
rain. 43/4" (121 ram)
rnaxi31L__3/8" (797mm)
Single Oven 27"
It is good practice, when oven is
installed at the end of a cabinet run,
adjacent to a perpendicular wall or
cabinet door, to allow at least 1/4"
space between the side of the oven and
the wall/door.
For oven support, install 2x4's
extending front to back flush with the
bottom and the side of the opening. The
supporting base must be well secured
to the floor/cabinet and level.
Note: The conduit box must be installed
either above or below the unit. If the
conduit box is installed below the unit, a
2" diameter hole or space is required
between the back wall and the right rear
of the 2x4 supports.
The cabinet base must be flat and
capable of supporting a weight of at
least 210 Ibs (95 kg).
English 3

Advertisement

Chapters

Table of Contents
loading

Table of Contents