Displaying Stored Values - HMM Diagnostics smartLABeasy User Manual

Displaying stored values

Your smartLAB
® easy will save up to 90 measurement values. If you want
to display the most recent value, press the „MEM" button. The value will
appear on the display. By continuously pressing the „MEM" button you can
scroll through the values stored on the monitor.
Note: Your smartLAB
® easy automatically saves the value after each
measurment. When 90 values have been stored, the monitor will delete
the 1st value.
You can turn off the monitor by pressing „START". The meter will turn off
automatically after 3 minutes of non-usage.
The monitor may stop working if there is an interference of electrostatic
discharge.
18