Measuring Process - HMM Diagnostics smartLABeasy User Manual

Measuring process

• After you have applied the monitor to your
wrist and you are in a comfortable sitting
position, press the „START" button. Your
smartLAB
® easy will start with a self-test.
All LCD parts will flash for 2 seconds.
• After the self-test and the flashing, your
smartLAB
® easy will inflate automatically.
Note: Your smartLAB
sure values: 187, 225, 263 and 300 mmHg.
When the measurement starts, the device
will automatically chose the suitable infla-
tion value depending on your own blood
pressure.
® easy has 4 preset pres-
15