Reading Values - HMM Diagnostics smartLABeasy User Manual

Reading values

The display will automatically show your sys-
tolic and diastolic blood pressure values (in
mmHg).Your pulse rate is displayed next to
the „❤" symbol.
If you want to measure again, simply press
the „START" button.
Note: You should wait 3-5 minutes after each measurement to let the blood
circulation in your arm recover.
It is unusual to obtain the same values with each measurment. Your consti-
tution is changing minutely and so does sour blood pressure level. For this
reason it is recommended that blood pressure values must be interpreted
on the basis of multiple measurements.
17