Life Smart LS-3ECO Owner's Manual page 11

Portable infrared heater with remote control
Table of Contents

Advertisement

3. High Mode indicator light: Will be lit when High Heat mode is engaged
4. Digital display: Indicates set desired room temperature
5. Fahrenheit indicator light: Will be lit when temperature displayed is in Fahrenheit
6. Power indicator light: Indicates that the heater is receiving power from outlet. Will flash when
powered "ON'
7. Remote control signal sensor
8. Power Switch Button: Powers the display on and off
9. Mode button: To select between High, Low, and Eco modes
10. Temperature Up button: To increase desired temperature
11. Temperature Down button: To decrease desired temperature
12. Timer button: Used to engage timer mode and to set hour value for the timer
13. ℃/℉ Button: Alternates between Fahrenheit and Celsius
14. Celsius indicator light: Will be lit when temperature displayed is in Celsius
15. Timer indicator light: Will be lit when the Timer is engaged and active
Remote Control
Temp up button: To increase desired temperature
ON/OFF button: Powers the display on and off
Temp down button: To decrease desired temperature
Mode button: Used for mode selection
℃/℉ button: For alternating between Fahrenheit and Celsius
Timer button: Used to engage timer mode and to set hour value for the timer
Battery compartment (rear of remote)
18
Battery compartment cover

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents