Haier 32T51 User Manual page 22

Select Channels with Numeric Keys
1. Operations to select channels with 1 digit (0-9):
Press the number keys (0-9)on the remote control to select TV channel directly.
2. Operations to select channels with 2 digits (10-99):
Press the number keys with 2 digits (10-99) on the remote control to select TV
channels.
3. Operations to select channels with 3 digits (100-199):
Press the number keys with 3 digits (100-199) on the remote control to select TV
channels.
Note
With the mode of
:
HDMI2, PC all functions and adjustments are similar with TV. User can
check it at convenience.
function with external HDMI/DVI commutator.
USB signal source operation
please insert USB memory card into USB interface of TV, p ress "source" key on the
remote control or front panel to select USB signal source (if you don't insert the USB
memory card into USB interface of TV, operation is invalid), press "OK" key to enter.
Notice: This USB interface only support move U dish, can't connect move hard drive,
also can't connect to USB interface of computer. USB support file format with Mp3/
JPG. It isn't compatible with some of move U dishes, please replace move U dish.
Basic Operation Instruction
AV1, AV2, S-VIDEO1, S-VIDEO2, YPBPR, HDMI1,
HDMI connector can realize DVI connector
21