Watching Tv Program - Haier DTA-2198PF Owner's Manual

Watching TV
You can watch TV program in a preset channel.

Watching TV program

1 2 3 4
5 6 7 8
9 9 0 0
P+
V- V+
MENU
P-
P+
V- V+
MENU
P-
How to select TV program
Select the desired program
1 Using "Program number" buttons
Directly enter the channel number with the numeric keypad
on the remote control.
To select channel numbers from 10 ~ 99 press [-/--] button
and enter the two digit channel number
To select channel numbers from 100 ~ 218 press [-/--] button
twice and enter the 3 digit channel number
2 Using the P+/- buttons
Press the P+ button to select a channel number in number
increasing direction.
Press the P- button to select a channel number in number
decreasing direction.
Select the desired sound
Press the V-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~99. When
the volume buttons are pressed the volume level is
displayed automatically on the TV screen.
If the colour or sound of a channel is abnormal
Usually this should be set in the
Auto position. However if the
colours displayed on the screen
are incorrect you can manually
select the correct colour system.
When finish remember to turn it
back to auto again so that other
programs will still work correctly.
To select the colour change
option press the MENU button
on the remote control.
If picture colo r is abnormal u
Use the P+/- buttons to select Colour then the
V-/+ buttons to change between Auto,
SECAM and NTSC443
the setting.
If the picture sound is abnormal
Use the P+/- buttons to select Sound then press the
V-/+ buttons to select the sound system.
TUNE
COLOUR
SOUND
BAND
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
PAL, NTSC,
. Press the EXIT button to save
AUTO
BG
VHFL
OFF
0