D-Link DFL-260E User Manual page 551

log receiver with IDP, 328
whitelist precedence, 260
SNMP
advanced settings, 70
community string, 69
MIB, 69
monitoring, 69
traps, 60
with IP rules, 69
SNMP Before Rules setting, 70
SNMP Request Limit setting, 70, 71
source based routing, 165
spam filtering, 262
caching, 266
logging, 265
tagging, 264
spam WCF category, 311
spanning tree relaying, 222
spillover RLB algorithm, 170
spoofing, 243
SSH, 39
SSH Before Rules setting, 50
SSH client keys, 364
SSL acceleration, 295
state-engine, 19
packet flow, 23
stateful inspection (see state-engine)
stateful NAT pools (see NAT)
Static address translation (see SAT)
Static ARP Changes setting, 118
Strip DontFragment setting, 514
switch routes (see transparent mode)
Sync Buffer Size (HA) setting, 502
Sync Pkt Max Burst (HA) setting, 502
SYN flood protection, 88, 335
syslog, 58
system backup/restore, 75
System Contact (SNMP) setting, 71
System Location (SNMP) setting, 71
System Name (SNMP)setting, 71
T
tab completion (see CLI)
TCP Auto Clamping setting, 515
TCP ECN setting, 518
TCP FIN/URG setting, 518
TCP FIN Idle Lifetime setting, 523
TCP Idle Lifetime setting, 523
TCP MSS Log Level setting, 515
TCP MSS Max setting, 515
TCP MSS Min setting, 515
TCP MSS On High setting, 515
TCP MSS on Low setting, 515
TCP MSS VPN Max setting, 515
TCP NULL setting, 518
TCP Option ALTCHKDATA setting, 517
TCP Option ALTCHKREQ setting, 516
TCP Option Con Timeout setting, 517
TCP Option Other setting, 517
TCP Option SACK setting, 516
TCP Option Sizes setting, 515
TCP Option TSOPT setting, 516
TCP Option WSOPT setting, 516
TCP Reserved Field setting, 518
TCP Sequence Numbers setting, 518
TCP SYN/FIN setting, 517
TCP SYN/PSH setting, 517
TCP SYN/RST setting, 517
TCP SYN/URG setting, 517
TCP SYN Idle Lifetime setting, 523
TCP URG setting, 518
TCP Zero Unused ACK setting, 516
TCP Zero Unused URG setting, 516
Teriary Time Server setting, 142
TFTP ALG, 258
threshold rules, 477, 506
in zonedefense, 506
time synchronization, 138
Time Sync Server Type setting, 142
Time Zone setting, 141
TLS ALG, 294
traffic shaping, 451
bandwidth guarantees, 461
bandwidth limiting, 454
for VPNs, 465
FwdFast IP rule exclusion, 454
objectives, 451
pipe groups, 462
precedences, 457
recommendations, 465
summary, 466
with IDP, 472
Transaction Timeout (DHCP) setting, 236
Transparency ATS Expire setting, 224
Transparency ATS Size setting, 224
transparent mode, 212
advanced settings, 223
and internet access, 217
and NAT, 218
grouping IP addresses, 218
implementation, 213
single host routes, 214
switch routes, 212, 214
with DHCP, 216
with high availability, 216
with VLANs, 215
vs routing mode, 212
TTL Min setting, 512
TTL on Low setting, 512
tunnels, 93
U
UDP Bidirectional Keep-alive setting, 523
UDP Idle Lifetime setting, 523
UDP Source Port 0 setting, 532
Unknown VLAN Tags setting, 104
unnumbered PPPoE, 106
Unsolicited ARP Replies setting, 118
uploading files with SCP, 46
user authentication (see authentication)
user auth HTML
customizing, 379
user based routing, 165
Use Unique Shared Mac (HA) setting, 497, 502
551
Alphabetical Index