D-Link DFL-260E User Manual page 210

4.6.4. Advanced IGMP Settings
Chapter 4. Routing
group-and-source specific query. Global setting on interfaces without an overriding IGMP Setting.
Default: 5,000
IGMP Max Total Requests
The maximum global number of IGMP messages to process each second.
Default: 1000
IGMP Max Interface Requests
The maximum number of requests per interface and second. Global setting on interfaces without an
overriding IGMP Setting.
Default: 100
IGMP Query Interval
The interval in milliseconds between General Queries sent by the device to refresh its IGMP state.
Global setting on interfaces without an overriding IGMP Setting.
Default: 125,000
IGMP Query Response Interval
The maximum time in milliseconds until a host has to send a reply to a query. Global setting on
interfaces without an overriding IGMP Setting.
Default: 10,000
IGMP Robustness Variable
IGMP is robust to (IGMP Robustness Variable - 1) packet losses. Global setting on interfaces
without an overriding IGMP Setting.
Default: 2
IGMP Startup Query Count
The firewall will send IGMP Startup Query Count general queries with an interval of
IGMPStartupQueryInterval at startup. Global setting on interfaces without an overriding IGMP
Setting.
Default: 2
IGMP Startup Query Interval
The interval of General Queries in milliseconds used during the startup phase. Global setting on
interfaces without an overriding IGMP Setting.
Default: 30,000
IGMP Unsolicated Report Interval
210