Important Safety Instructions - XTE Electronic Digital Technology XTDT3200 User Manual

Digital technology series digital power amplifier
Table of Contents

Advertisement

Important safety instructions

1. Follow carefully the attached documentation
and keep it for future reference
2. Comply with the warnings
3. Store the packaging and check that all material
is in excellent conditions.
4. Do not use water near the product, do not pour
water or any other liquid on the amplifier. Do not
to use it with wet hands or feet into the water.
5. Do not use next to heat sources such as
radiators, stoves or the like.
6. Check the integrity
of the mains cable.
tread on the cable and do not squeeze the plug.
7. Connect the plug to a socket equipped with
grounding. Do not camper the plug. If the plug
supplied is not consistent with your socket, please
apply to an electrician for its replacement.
8. Connect to supply mains with the same voltage
as indicated on the back of the amplifier.
9. Install the amplifier in compliance with the
instructions.
10. Do not obstruct the air ducts.
11. Disconnect the appliance in case of storm and
if unused.
12. Connect according to the instructions only.
This symbol indicates
the presence of
important directions for
use and information
that should be given
particular attention so
as to use the product
properly.
This symbol indicates
the presence of
"dangerous voltage"
that may cause the risk
of electrical shock. Pay
the utmost attention
and proceed
cautiously.
Do not
13. Do not connect input signal higher than that
indicated in the manual.
14. Do not connect the amplifier output to the
input of another channel.
15. Do not connect any output of the amplifier to
power sources such as battery, voltage supply or
outlet,
regardless of the amplifier is on or off.
16. Keep the volume controls to a minimum during
the amplifier switching on/off .
17. Do
not remove the upper or lower cover: there
is a risk of electrical shock.
18. Do not try to self-repair the appliance, but
apply to qualified personnel.
19. Clean with a dry cloth only.
20. The product shall be handled by skilled
personnel in the following cases:
-
mains cable
or plug damaged
-
Exposure of the product to rain or humidity
-
Some liquid entered inside the unit.
-
An object fell on the unit
-
The unit fell down and is damaged
-
The product does not work correctly or shows
a remarkable change of performance.
21. A careful supervision is necessary if the
product is used in the presence of children or
inexpert adults.
22. This product could produce sound levels,
which cause damage to the hearing.. Pay the
utmost attention and do not operate at high level
of volume or at an uncomfortable level for a long
time. Consult an audiometric specialist in case of
hearing loss or complaints.
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents