Advertisement
Quick Links
Download this manual
See also:
Use and Care Manual
INSTALLATIONINSTRUCTIONS
30" (76 CM) FREESTANDING ELECTRICRANGES
Table of Contents
RANGE SAFETY.................................................................. 1
INSTALLATIONREQUIREMENTS..................................... 2
Tools and Parts ................................................................ 2
Location Requirements.................................................... 2
Electrical Requirements ................................................... 3
INSTALLATION INSTRUCTIONS....................................... 4
Unpack Range.................................................................. 4
Install Anti-Tip Bracket ..................................................... 5
Electrical Connection ....................................................... 6
Verify Anti-Tip Bracket Location ...................................... 9
Level Range.................................................................... 10
Complete Installation...................................................... 10
Moving the Range.......................................................... 10
ANTI-TIP BRACKET TEMPLATE .................................... 1 2
RANGE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow
instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
1.__
1
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip
bracket to rear range foot,
Reconnect
the anti-tip
bracket,
if the range is moved.
Failure to follow
these instructions can result in death or serious
burns to children
and adults.
iMPORTANT:
Save for local electrical inspector's use.
Installer:
Leave installation instructions with the homeowner.
Homeowner:
Keep installation instructions for future reference.
9758377
Advertisement
Related Manuals for Inglis IES356RD1
Summary of Contents for Inglis IES356RD1
-
Page 1: Table Of Contents
INSTALLATIONINSTRUCTIONS 30" (76 CM) FREESTANDING ELECTRICRANGES Table of Contents RANGE SAFETY..............1 INSTALLATIONREQUIREMENTS........2 Tools and Parts ..............2 Location Requirements............ 2 Electrical Requirements ........... 3 INSTALLATION INSTRUCTIONS........4 Unpack Range..............4 Install Anti-Tip Bracket ............. 5 Electrical Connection ............6 Verify Anti-Tip Bracket Location ........ -
Page 2: Installationrequirements
INSTALLATION REQUIREMENTS Gather the required tools and parts before starting installation. IMPORTANT: Observe all governing codes and ordinances. Failure to meet codes and ordinances could lead to fire or Read and follow the safety instructions provided with any tools listed here. electrical shock. - Page 3 *NOTE: 24" (61 cm) minimum when bottom of wood or metal Product Dimensions cabinet is protected by not less than 1/4"(0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020"...
-
Page 4: Installationinstructions
The minimum conductor sized for the copper 4-wire power If connecting to a 4-wire system: cord are: This range is manufactured with the ground connected to the cabinet. The ground must be revised so the green grounding wire 40-amp circuit 2 No,-8 conductors of the 4-wire power supply cord is connected to the cabinet. - Page 5 5. To mount anti-tip bracket to wood floor, drill two %" (3.2 mm) holes at the positions marked on the bracket template. Remove template from floor. Tip Over Hazard A child or adult can tip the range and be killed. To mount anti-tip bracket to concrete or ceramic floor, use a 3/16"(4.8 mm) masonry drill bit to drill 2 holes at the positions Connect anti-tip bracket to rear range foot.
-
Page 6: Electrical Connection
% OyS_ @CI O_" Direct Wire Power Supply Cord Electrical Shock Hazard Electrical Shock Hazard Disconnect power before servicing. Disconnect power before servicing. Use a new 40 amp power supply cord. Use 8 gauge copper or 6 gauge aluminum wire. Plug into a grounded outlet. - Page 7 2. Connect the green ground wire from the power supply cord to the range using the ground-link screw and cup washer. The Power Supply Cord Installation ground wire must be attached first and must not contact any other terminal. WARNING: Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
- Page 8 2. Connect theneutral (center) wire tothecenter terminal 4-wire connection: Direct wire connector using one ofthehexwasher head screws. Securely Use this method for: tighten s crew forproper electrical connection. • New branch-circuit installations (1996 NEC) • Mobile homes • Recreational vehicles •...
- Page 9 Loosen (do not remove) the hex washer head screw and insert the neutral (white) wire under the screw clamp at the bottom of the center position terminal connector. Insert the other 2 wires (lines 1 and 2) under the other 2 screw clamps.
-
Page 10: Level Range
1. Place rack inoven. P lace l evel onrack, f irst s ide toside; t hen front t oback. If range is not level, pull range forward until rear leveling leg is removed from the anti-tip bracket. Use %" drive ratchet and Tip Over Hazard channel lock pliers to adjust leveling legs up or down until A child or adult can tip the range and be killed. -
Page 12: Anti-Tip Bracket Template
ANTI-TIP BRACKET TEMPLATE Cut on dotted lines and place the left edge against the left side cabinet and the top edge against the rear wall. edge Use this template to anchor the left rear leg of range. 9758377 5/05 © 2005. Printed in U.S.A.