Jenn-Air JIC4430 Installation Instructions Manual page 3

Product Dimensions
30" (76.2 cm) Cooktop
A
C
Model JIC4430 Model KICU509
A. 215/16 '' (54.1 cm)
B. 305_ '' (77.0 cm)
C. 31/8'' (8 cm)
A. 21%6" (54.1 cm)
B. 30¾" (78.2 cm)
C. 31/8" (8 cm)
C
Models JI04536
and KICU569
A. 21%6" (54.1 cm)
B. 36 _" (92.0 cm)
C. 31/8" (8 cm)
Cabinet Dimensions
IMPORTANT: If installing a range hood or microwave hood
combination above the range, follow the range hood or
microwave hood combination installation instructions for
dimensional clearances above the cooktop surface.
C
A. 297/2" (75.0 cm) on 30" (76.2 cm) models
33_" (84.0 cm) on 36" (91.4 cm) models
B. Combustible area above countertop (shown by dashed box above)
C. 30" (76.2 cm) minimum clearance between top of cooktop platform
and bottom of uncovered wood or metal cabinet (24" [61 cm]
minimum clearance if bottom of wood or metal cabinet is covered
by not less than ¼" [0.6 cm] flame retardant millboard covered with
not less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless
steel, or 0.024" [0.06 cm] aluminum or 0.020" [0.05 cm] copper)
D. 13" (33.0 cm) recommended upper cabinet depth
E. 2" (5.1cm)
F. 19_" (49.0 cm)
G. 18" (45.7 cm) minimum clearance from upper cabinet to countertop
within minimum horizontal clearances to cooktop
H. Junction box or outlet; 12" (30.5 cm) minimum from bottom of
countertop
I. Junction box or outlet; 10" (25.4 cm) from right-hand side of
cabinet
J. 29V2" (75.0 cm) on 30" (76.2 cm) models
33_" (84.0 cm) on 36" (91.4 cm) models
K. 1" (2.5 cm) minimum distance to nearest left and right side
combustible surface above cooktop
L. 1" (2.5 cm) minimum clearance between back wall and countertop
M. IMPORTANT: For proper ventilation, provide a vent of _" (5 mm)
under the countertop, in the front of the cabinet. The ventilation
opening is to extend the full length of the cooktop cutout. See the
following illustration.
:M
NOTES: After you make the countertop cutout, some
installations may require notching down the base cabinet side
walls to clear the cooktop base. To avoid this modification, use a
base cabinet with sidewalls wider than the cutout.
If cabinet has a drawer, a 51/8 '' (13 cm) depth clearance from the
countertop to the top of the drawer (or other obstruction) in base
cabinet is required.