Fenton S1000A User Manual page 6

Introduction
Features of Line-interactive UPS
* Automatic Voltage Regulation Function -
AVR provides voltage range by input ±22% and output ±5%
regulation, which depend on two boosts and two bucks design.
* DC Start Function-
Allow you to power on the UPS inverter (battery) operation,
even in absence of external power. This function offers you the
convenience of powering on your computer via UPS when the
AC utility power is out.
* Network Line Protection-
Two special jacks allow RJ45 connection to protect your
Internet (Modem) or 10Base-T signals from surge damage.
* Smart Overload Protection-
While the UPS is on, the S series UPS smart chip monitors
load conditions. In case an overload or short-circuit occurs,
your UPS will beep continuously to alarm, or shut down
automatically to save your critical load and avoid the nuisance
fuse blows.
4