Fenton S1000A User Manual page 18

Item Symbol
9.
10.
11.
LOW
12.
13.
Mode
AC out
AC in
AC out
BATT.
TEMP.
TIMER
14.
TIMER
BATT.
Selection Buttons for modes & values.
All the operation data will be displayed on LCD screen. By selecting the
required mode (upward or downward), the related value will be displayed.
LCD indicator table (2)
Indication
Silence mode
UPS fault
Battery normal
Battery low
Battery
replacement
Battery voltage
level
Value
V
V
Hz
V
℃
Min. to off
Hr. to on
Min. to off
The audible alarm has been silenced. To reset
the alarm in Back-up mode, push the control
button (not available during low battery level or
abnormal condition).
The UPS has failed and must be repaired.
Contact a qualified service person.
1. In normal operation, this symbol indicates a
charged battery.
1. When the battery charge level is low, the word
"LOW" will be added to the symbol.
The battery has failed and must be replaced.
The battery is checked each time the Test
Function is executed.
1. The higher the battery voltage, the more bars
will illuminate.
2. When the UPS is charging the battery, the
battery symbol and the level indicator will blink
together.
AC output voltage.
AC input voltage.
AC output frequency.
DC battery voltage.
UPS internal temperature.
The UPS will turn off when the displayed value
reaches zero. For example, if the timer shows
0.5 Min to off, the UPS will shut down in 30
seconds.
The UPS will turn on when the displayed value
reaches zero. For example, if the timer shows 48 Hr
to on, the UPS will turn on in 2 days.
The estimated remaining run time in Back-up
mode. The accuracy of the value is influenced by
the loading type, ambient temperature and battery
condition (old or new).
16
Description
Description