Subscribe to Our Youtube Channel
Related Manuals for elektraLite 1018
Summary of Contents for elektraLite 1018
- Page 1 1018 USER MANUAL elektraLite LED pro line (a division of Group One), 70, Sea Lane, Farmingdale, NY11735, U.S.A. T. +1 (516)-249-3662. F. +1 (516)-249-8870 www.elektraLed.com www.myElektraLite.com...
-
Page 2: Safety Instructions
Please keep this manual for future reference. ElektraLite LED Pro Line 1018 wash fixture uses 18 high powered 10 watt quad leds in a balanced arrangement giving you incredible output. Please unpack it carefully and check whether it was damaged in shipping. -
Page 3: General Guidelines
Please do not shake ElektraLite LED Pro Line 1018 and avoid using brute force when installing or operating it. When choosing the location to install ElektraLite LED Pro Line 1018 , please make sure that it is not exposed to extreme heat, moisture or dust. The minimum distance between ElektraLite LED Pro Line 1018 and the illuminated surface must be more than 3 feet. -
Page 4: Dmx-512 Control Connection
DMX controller. The other end should be connected to the male 5-pin XLR input of the ElektraLite LED Pro Line 1018. Then daisy-chain out of the first ElektraLite LED Pro Line 1018 and into the next ElektraLite LED Pro Line 1018 or other dmx device. Never “Y” split the DMX connection. - Page 5 6. Menus in the fixture. Root Menu Sub Menu 1 Sub Menu 2 STAT (STATIC LOOK) R(ED) 0-255 G(REEN) 0-255 B(LUE) 0-255 W(HITE) 0-255 S(STROBE) 0-255 AUTO (AUTOMATIC) AT 01 THROUGH TO AT10 PR 01 THROUGH TO PR10 SLAV(E) ASSIGN DMX CHANNEL 1-512 PERS (PERSONALITY) STAG(E)
-
Page 6: Auto Programs
7. Static Look. The ElektraLite LED Pro Line 1018 can be set to a single static look quickly. Use the Menu button to get to STAT. Press Enter. The next screen will read R000. This is addressing the RED leds. - Page 7 10. DMX 512 Setting (address). Sets up the address for the dmx. Using the Menu button in the root menu go to DMX Press Enter to get into DMX and the display will read the current dmx channel. The display will read for example d.001 This means the fixture's current address is 1 To change it, use the ↑...
- Page 8 13. Edit The Edit function allows the 10 of the inbuilt programs to be edited and customized. The programs that can be edited are PR01 through PR10. Each of the programs can have up to 99 scenes (SC01-SC99). Each scene has 5 components that can be edited on the fixture. They are the Red leds, the Green leds, the Blue leds, the time the scene is "played"...
- Page 9 14. Set. (Set has several Sub Menus which allow functions to be used). 1). UPLD. Custom programs can be uploaded from a master fixture into a slave fixture. First:- connect the fixtures to power and have a dmx cable going from the Master (dmx out) to the Slave (dmx in).
- Page 10 5).RGBW The RGBW setting allows the ability to calibrate the white achieved when mixing RGB. When RGBW is set to OFF, the output when Red, Green, and Blue is at maximum is 255 for all three colors. By definition this combination produces a white with a blue tinge which affects all other colors if cameras and other video equipment are "keyed"...
- Page 11 16. CAL 2 When RGBW is turned on under the SET menu, then CAL2 will allow you to set up the white balance for the RGB components. To adjust the white balance, go through the Root Menu until CAL 2., the screen will read RGBW press enter again.
- Page 12 ARC1 0-255 0-255 GREEN 0-255 BLUE 0-50 Linear dimmer speed（DIM=OFF） 51-100 nonlinear speed1（DIM1） 101-150 nonlinear speed 2（DIM2） 151-200 nonlinear speed 3（DIM3） 201-255 nonlinear speed 4（DIM4） ARC1+D 0-255 MASTER DIMMER 0-255 0-255 GREEN 0-255 BLUE 0-50 Linear dimmer speed（DIM=OFF） 51-100 nonlinear speed 1（DIM1） 101-150 nonlinear speed 2（DIM2）...
- Page 13 ARC2+S 0-255 MASTER DIMMER 0-255 0-255 GREEN 0-255 BLUE 0-255 WHITE 0-255 STROBE 0-50 Linear dimmer speed（DIM=OFF） 51-100 nonlinear speed 1（DIM1） 101-150 nonlinear speed 2（DIM2） 151-200 nonlinear speed 3（DIM3） 201-255 nonlinear speed 4（DIM4） 0-255 H hue 0-255 S saturation level 0-255 V brightness 0-50...
-
Page 14: Dmx Channel Assignments
DMX Channel Assignments. Grand Master for RGBW 0-255 Leds (or chase speed when anyone of PR01 thru PR10 in Ch08 is operational) 0-255 GREEN Leds (or cross fade time when anyone of PR01 thru PR10 in Ch08 is operational) 0-255 Blue Leds 0-255... - Page 15 DMX Channel Assignments (Cont.) 8 (cont) PR04 (Programmable Automatic program 04) 191-200 PR05 (Programmable Automatic program 05) 201-210 PR06 (Programmable Automatic program 06) 211-220 PR07 (Programmable Automatic program 07) 221-230 PR08 (Programmable Automatic program 08) 231-240 PR09 (Programmable Automatic program 09) 241-250 PR10 (Programmable Automatic program 09) 251-255...
- Page 16 DMX Channel Assignments (Cont.) ID25 ID26 ID27 ID28 ID29 ID30 ID31 ID32 ID33 ID34 ID35 ID36 ID37 ID38 ID39 ID40 ID41 ID42 ID43 ID44 ID45 ID46 ID47 ID48 ID49 ID50 ID51 ID52 ID53 ID54 ID55 ID56 ID57 ID58 ID59 ID60 ID61 ID62 ID63...
-
Page 17: Cleaning And Maintenance
12" x 10.9" x 9.1" 8.5 kgs 19 pounds ElektraLite LED Pro Line is a division of Group One. Group One and its divisions are constantly improving their product range and we reserve the right to make changes without prior notice. -
Page 18: Other Products
Other Products. ElektraLite LED Pro Line has other great products that are manufactured under the Elektralite product line. Go check out the website at www.myelektralite.com A preview of the products include:- Elektralite CP-20 Lighting Controller The Elektralite TurboFog (check out the ElektraFog too!) - Page 19 The Elektralite TurboHazer (check out the ElektraHazer too!)
Need help?
Do you have a question about the 1018 and is the answer not in the manual?
Questions and answers