Appendix 2 Installing a Standalone Unit
To install the 7226HT-STD or 7226HR-STD Standalone:
1. Place the 7226H unit on the standalone flange, matching the
holes.
2. Using four screws (#4 or #6) secure the unit and the flange to the
wall.
3. Apply AC power to the standalone power supply unit.
4. Connect the 7226HD unit to the power supply. The Laser LED
should be lit.
All remaining steps are the same as in the product manual. See
sections
2.1 Setting up the Transmitter
on page 10.
Receiver
7226H Interfacility Link Installation and User's Guide
Foxcom proprietary information
on page 8 and
2.3 Setting Up the
page 35