Table of Contents
Advertisement
Appendix 2 Installing a Standalone Unit
To install the 7225HT-STD or 7225HR-STD Standalone:
1. Place the 7225HIFL unit on the standalone flange, matching the
holes.
2. Using four screws (#4 or #6) secure the unit and the flange to the
wall.
3. Apply AC power to the standalone power supply unit.
4. Connect the 7225HD unit to the power supply. The Laser LED
should be lit.
All remaining steps are the same as in the product manual. See
sections
2.1 Setting up the Transmitter
on page 10.
Receiver
7225H Interfacility Link Installation and User's Guide
Foxcom proprietary information
on page 8 and
2.3 Setting Up the
page 35
Advertisement
Table of Contents
Troubleshooting
