Advertisement
Quick Links
Owner's Manual & Assembly Instructions
BI01
Model No.
709181207
BUILDING DIMENSIONS
*Approx.
Foundation
Size
Size
5' x 4'
57" x 45 7/8"
1,4m x 1,1m 145cm x 117cm
BW54-A
YL54
* Size rounded off to the nearest foot
Storage Area
Sq. Ft. Cu. Ft.
Width
16
93
2
3
1,5m
2,6m
BWG54
YL54M
CAUTION: SOME PARTS HAVE SHARP EDGES. CARE
MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES
TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ
SAFETY INFORMATION PROVIDED IN THIS MANUAL
BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES
WHEN HANDLING METAL PARTS.
Exterior Dimensions
(Roof Edge to Roof Edge)
Depth
Height
59 1/2"
48"
70 3/4"
151cm
122cm
180cm
BWW54
Interior Dimensions
(Wall to Wall)
Width
Depth
Height Width Height
54 1/4"
43 1/8"
69 1/2" 22 1/4"
138cm
110cm
177cm
Door
Opening
65"
57cm 165cm
Advertisement
Related Manuals for Arrow Group Industries BW54-A
Summary of Contents for Arrow Group Industries BW54-A
- Page 1 Owner's Manual & Assembly Instructions BI01 Model No. BW54-A BWG54 BWW54 YL54 YL54M CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ 709181207 SAFETY INFORMATION PROVIDED IN THIS MANUAL BEFORE BEGINNING CONSTRUCTION.
- Page 2 The parts list is located on page 12. •If you find that a part is missing, include the model number of your building and contact: Arrow Group Industries, Inc. Customer Service Department Route 50 East...
-
Page 3: Tools And Materials
PLAN AHEAD..Watch the Weather: Be sure the day you select to install your building is dry and calm. Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Teamwork: Whenever possible, two or more people should work together to assemble your building. - Page 4 SAFETY FIRST..Safety precautions are important to follow throughout the construction of your building. •Care must be taken when handling various •Practice caution with the tools being used in the pieces of your building since some contain assembly of this building. Be familiar with the sharp edges.
- Page 5 CARE & MAINTENANCE..A5 Web Finish: For long lasting finish, periodically clean and wax the exterior surface. Touch- up scratches as soon as you notice them on your unit. Immediately clean the area with a wire brush; wash it and apply touch-up paint per manufacturer's recommendation. Roof: Keep roof clear of leaves and snow with long handled, soft-bristled broom.
- Page 6 ACCESSORIES..A6 WEB ROOF STRENGTHENING FLOOR FRAME KITS (heavy snow load) KITS Extra roof beams and gable braces designed for added protection against heavy snow accumulation. Increases the strength of your roof by 50%. ANCHOR KITS Model No. AK4 MODELS FB47410, FB5465, FB106-A Anchor Kit contains heavy-duty steel FB109-A and FB1014-A augers, 60' (18m) of steel cable and 4 cable...
- Page 7 THIS PAGE LEFT BLANK INTENTIONALLY...
- Page 8 THIS PAGE LEFT BLANK INTENTIONALLY...
- Page 9 Foundation BI09 The Foundation For Your Building OPTION 1: ARROW FLOOR FRAME KIT: (Order No. FB5465) Arrow has the best base for your building in this simple kit. It keeps stored items above the ground. This kit should be used with one of the following: A.
- Page 10 Anchoring Anchoring Down The Building It is important that the entire floor frame be anchored after the building is erected. Below are recommended ways of anchoring. Anchoring into Wood/Post: Arrow Anchoring Kit: (Model No. AK4 or 60298) Use 1/4" Wood Screws. There are 1/4" (0,63cm) dia. Recommended for use with any suggested base.
- Page 11 Hardware BI11 Remove from bag of screws and save for the last step 65900A 65103 #10Bx1/2" Black Screw (4) 65923 65004 #8-32 Hex Nut (31) (Packed with Screws) #8-32x3/8" Bolt (31) #8Ax5/16" Screw (121) 65109 66098 66646 #8-32 Acorn Nut (3) Plastic Spacer (2) 66082 Washer (137)
-
Page 12: Parts List
Parts List BI12 Assembly Part Part Quantity Check Key No. Number Description in Carton List 3719 Door Handle Brace 6300 Vertical Door Brace 6627 Wall Panel 6633 Corner Panel 7044 Corner Panel 10500 Horizontal Door Brace 10473 Door 7461 Rear Wall Angle 7464 Right Roof Panel 7465... - Page 13 Assembly by Key No. BI13...
- Page 14 ● Parts Needed For ● ● ● ● ● ● 9457 Door Track (1) Step 1 ● ● ● ● ● 7661 Header (1) Door Track/Header Assembly BI14 The door track/header assembly sup- ports the sliding door and reinforces the front wall. It is made up of two pieces.
- Page 15 ● Parts Needed For ● ● ● ● ● ● 9458 Front Floor Frame (1) Step 2 ● ● ● ● ● 8972 Rear Floor Frame (1) Floor Frame ● ● ● ● ● 8971 Side Floor Frame (2) BI15 RIGHT REAR 8971...
- Page 16 ● Parts Needed For ● ● ● ● ● ● 7044 Corner Wall Panel (2) Step 3 ● ● ● ● ● 6633 Corner Wall Panel (2) Corners BI16 STEP NOTE Narrow The remainder of the building assembly Side REAR requires many hours and more than one person.
- Page 17 ● Parts Needed For ● ● ● ● ● ● 7461 Rear Wall Angle (1) Step 4 ● ● ● ● ● 9918 Rear Wall Channel (1) Frames ● ● ● ● ● 9919 Side Wall Channel (2) BI17 The main frame pieces give rigidity to the side and rear walls and provide a surface for attaching the gables which support the roof.
- Page 18 ● ● ● ● ● 9456 Front Wall Panel (1) ● Parts Needed For ● ● ● ● ● ● Door Track Assembly (1) Step 5 ● ● ● ● ● 9698 Door Jamb (1) Panels/Track/Jambs ● ● ● ● ● 9370 Door Jamb (1) ●...
- Page 19 ● Parts Needed For ● ● ● ● ● ● 7532 Right Gable (1) Step 6 ● ● ● ● ● 7533 Left Gable (1) Gables/Roof Beam ● ● ● ● ● 7660 Roof Beam (1) BI19 Lift and fasten a right and left gable, overlapping header in front, to the right and left hand wall with screws.
-
Page 20: Roof Assembly
● Parts Needed For ● Step 7 ● ● ● ● ● 7464 Right Roof Panel (1) Roof Assembly ● ● ● ● ● 7465 Left Roof Panel (1) BI20 STEP Installing the roof panels is best done with a step ladder. Begin installing roof panels at the right side of the building. - Page 21 ● Parts Needed For ● Step 8 ● ● ● ● ● 7534 Roof Trim (2) Roof Trim BI21 STEP Attach the roof trim to the ends of the roof panels on each side of the Roof Trim Roof Trim Cap building using screws at each panel overlap.
-
Page 22: Door Assembly
● ● ● ● ● 3719 Door Handle Brace (1) ● Parts Needed For ● Step 9 ● ● ● ● ● 10473 Door (1) Door Assembly ● ● ● ● ● 10500 Horizontal Door Brace (2) ● ● ● ● ● 6300 Vertical Door Brace (1) BI22 The steps on this page tell how to assemble the door. - Page 23 ● Parts Needed For ● ● ● ● ● ● Door Assembly (1) Step 10 ● ● ● ● ● 7972 Door Handle Door Installation & Adjustment Lock Bracket (1) BI23 From inside the building, put the Header Horizontal Door Brace bottom of the door assembly (on your right when you are inside the build- Door Track...
- Page 24 BW54-A BWW54 BWG54 YL54 YL54M BI24 SOME FACTS ABOUT RUST 1. Avoid nicking or scraping the coating surface, Rusting is a natural oxidizing process that occurs inside and out. when bare metal is exposed to moisture. Problem areas include screw holes, unfinished edges, or 2.
Need help?
Do you have a question about the BW54-A and is the answer not in the manual?
Questions and answers