Advertisement
There are multiple modes of operation with the flashlight. You may activate
the various modes by pressing the side button or tail button on the flashlight.
Modes (depending on the type of configuration):
Standard Output:
Peak Output:
Reserve Output:
Strobe:
Low Light:
Ramp:
There are also three different configurations for the button depending on the
type of flashlight purchased. The three different configurations are identified
as P1, P2, and P3.
P1:
1. Peak - from any mode, hold down button and keep it down, release button
and revert to previous mode.
2. Standard - single click.
3. Strobe - double click.
P2:
1. Peak – single click.
2. Ramp – hold button down and keep it down and light will steadily increase
in brightness; release button when desired brightness is achieved.
3. Strobe - double click.
P3:
1. Peak - from any mode, hold down button, release button from any mode
and flashlight turns off.
2. Standard – single click.
3. Low Light – double click.
TAC5382_PC3300_userGuide_510.indd 19
70 lumens (45 min runtime)
200 lumens (13 min runtime)
20 lumens (15 min runtime)
150 lumens (135 min runtime)
20 lumens (240 min runtime)
20-200 lumens (variable runtime)
PC3.300 User Guide
19
5/10/10 4:38 PM
Advertisement
