Fisher & Paykel HC30DTX1 Installation Instructions Manual page 10

Installation instructions
US
8
CA
Assembly of chimney cover
Mark the wall at the location of support
1
shown on the mounting template.
Drill holes in the wall, place anchors in the holes and attach support
2
Place tube with the extendible part
3 A
correctly lodged in the support
Next, secure support
4
the extendible tube. Extend the movable part of tube
to the support with the two side screws
E
B
A
(Fig.4a) according to the heights and specifications
C
hanging on the inside, making sure that flange
B
(Fig.4a).
C
to the upper end of the wall, making sure that it is properly aligned with
E
(Fig.4b).
F
Fig.4a
Fig.4 Assembly of chimney cover
Fig.3 Mounting template
C
until it reaches support
B
E
C
D
B
with screws (Fig.4a).
is
D
and connect
E
F
Fig.4b