Foxconn A7GMP-S User Manual page 101

2. Select a RAID array for use (also can refer to section 5-3)
After rebooting your computer, you will see the RAID software prompting you to
press [Ctrl-F].
Press [Ctrl-F] to enter the Option ROM Utility BIOS setup and configure the mirrored
RAID array as described in the 5-3 section. Finally, you can reach this step as
depicted.
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
LD No
LD 1
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD10
[↑] Up
3. Exit Option ROM Utility and restart computer to go to Windows.
4. In Windows, click "Cancel" to skip any "Found New Hardware Wizard".
Use driver CD and click on "AMD RAID Driver" to install the AMD RAID driver. The
RAID driver will be installed only when you select "RAID" in "OnChip SATA Type"
setting. If you do not select RAID, then RAID driver will not be installed.
[ Define LD Menu ]
[ Define LD Menu ]
RAID Mode Total Drv
RAID 0
RAID 1
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
[ Keys Available ]
[↓] Down [ESC] Exit [Enter] Select
Capacity(GB)
2 163.99
2 249.99
−−−− −−−−−−−−
−−−− −−−−−−−−
−−−− −−−−−−−−
−−−− −−−−−−−−
−−−− −−−−−−−−
−−−− −−−−−−−−
−−−− −−−−−−−−
−−−− −−−−−−−−
−−−− −−−−−−−−
94
Status
Functional
Functional
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−