1. Manuals
  2. Brands
  3. Anchor Manuals
  4. Stereo System
  5. Liberty Xtreme MPA-500
  6. Owner's manual

Anchor Liberty Xtreme MPA-500 Owner's Manual

Ac-powered sound system
Hide thumbs
Table of Contents

Advertisement

Quick Links

100-82-0/A, X50 2/6/01 9:58 AM Page 1

Troubleshooting Guide

Having trouble with the sound system?
Condition
No sound (power LED not lit):
No sound
(power LED lights):
Distorted sound:
Excessive hum or noise:
Having trouble with the wireless system?
Condition
No sound
(TX ON indicator lights):
No sound
(TX ON indicator off):
ANCHOR Audio, Inc. (310) 784-2300
100-0082-000 / Revision A, 06/98
Possible Solution
• turn POWER switch ON
• replace fuse
• check for output from source
• make sure all cables are completely plugged in
• increase volume control on input used
• check input cable connection
• lower input signal level
• use shielded input cable
• use a balanced input
Possible Solution
• set mute switch to ON position
• turn up wireless volume control
• plug a mic into belt-pack transmitter
• turn sound system ON
• turn transmitter power switch ON
• replace battery in transmitter
LIBERTY
MPA-5000
Owner
s Manual
'

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Liberty Xtreme MPA-500 and is the answer not in the manual?

Questions and answers

Related Manuals for Anchor Liberty Xtreme MPA-500

Summary of Contents for Anchor Liberty Xtreme MPA-500

  • Page 1: Troubleshooting Guide

    • plug a mic into belt-pack transmitter No sound • turn sound system ON (TX ON indicator off): • turn transmitter power switch ON • replace battery in transmitter LIBERTY MPA-5000 Owner s Manual ’ ANCHOR Audio, Inc. (310) 784-2300 100-0082-000 / Revision A, 06/98...

  • Page 2: Important Safeguards

    15VDC phantom power (switchable) AVIS: Pour eviter les risques d'incendie ou d’électrocution, n'exposez pas cet Anchor CD input: audio & power for Anchor CD-1 CD player article à la pluie ou a l'humidité. sensitivity for rated output: ATTENTION: Pour diminuer le risque d’incendie, remplacer par des fusibles...

  • Page 3: Quick Use Guide

    100-82-0/A, X50 2/6/01 9:58 AM Page 5 Blank Page Thank you for choosing an Anchor Audio portable sound system. Our products incorporate state-of-the-art design and the finest quality of materials and workmanship. We’re proud of our products and appreciate the confidence which you have shown by selecting an Anchor system.

  • Page 4: Getting Started

    Check unit carefully for damage which may have occurred Anchor’s dynamic, balanced, low impedance microphone during transit. Each Anchor product is carefully inspected at with a unidirectional pick-up pattern. It has an on/off switch the factory and packed in a special carton for safe transport.

  • Page 5: Wireless Operation

    100-82-0/A, X50 2/6/01 9:58 AM Page 9 Wireless Operation Feedback Information Replacing the transmitter battery What causes feedback? Note: The transmitter power switch must be in the OFF position! Feedback is a ringing, howling, or shrill sound that is self- generated by the sound system.
  • Page 6 The Liberty is easily and safely elevated above SHURE BROTHERS INC. the audience by using Anchor’s SS-450 speaker stand. SHURE BROTHERS INC. TX FCC ID: DD4L11 LX2 HANDHELD TRANSMITTER CANADA: 616 C9398 •...

  • Page 7: Operation

    The DC output jack is used to power (300 ma MAX) +12 VDC auxiliary equipment such as an outboard wireless receiver or Anchor’s Mini-Mix. It’s rated output is 12 volts DC, 300 ma maximum. Setting up difficult rooms Using the cassette tape player Reverberant rooms—those with acoustically-reflective...

  • Page 8: Mic Input

    OFF. Anchor CD Input (4-pin XLR jack) AC Accessory Anchor CD Input Outlet Power Indicator Anchor The Anchor CD input provides an audio and power Input Fuse connection for the CD-1 CD player accessory. Accessory Power Switch Outlet Line Output...

Table of Contents