WizCom Technologies Reading Pen User Manual page 39

the Opticard to activate the Opticard
mode. When the Opticard mode is
activated, the light at the tip of the Pen
blinks more rapidly than before.
2. To enter a letter in lower case, scan (or
gently touch with the Pen tip on) the bar
code for the corresponding key. The letter
appears in the display.
To enter an upper-case character (situated
left, above the bar code), scan Shift, then
the letter.
Scan Shift twice to activate/deactivate
CAPS LOCK. Activating CAPS LOCK
enables you to enter letters in upper case
only.
To enter a controlled character (situated
right, above the bar code), scan Ctrl, then
the letter. Controlled characters can be
entered only for the active character set.
To enter a controlled character in upper
case, scan Ctrl, then Shift (or Shift, then
Ctrl), then the letter.
3. To enter a space, place the cursor in front
of the letter that will follow the space
(using
4. To delete the previous character, scan
Shift, then the del key.
5. Continue scanning or touching the bar
code keys as required, until you have
created the desired word.
6. To translate the word you have entered,
scroll to GO and press
of the text appears in large type. You are
back in normal scanning mode.
or ), then scan the spc key.
ReadingPen User Manual
. The first word
37