Creating The Modem Connection - Laipac M2M 3350 User Manual And Reference Manual

Laipac Technology Inc. M2M 3350 User's Manual & Reference Guide
3.5

Creating the Modem Connection

If you are using the Bluetooth option, make sure the slider switch on the Serial Bluetooth
Dongle is set towards the antenna and not towards the DB9 connector as shown below. Make
sure the Bluetooth Serial Dongle is connected to the serial port on the M2M 3350. Note the
COM port as discovered from section 3.7.
Now that we have setup the modem we can setup the internet connection. Go to Control
Panel>Network Connections>File>New Connection... and click "Next". Select the checkbox
'Connect to the Internet' and then "Next".
© 2002-2007 by Laipac Technology Inc. All Rights Reserved. Page 11