Setting Time And Date In Windows Vista; Setting Time And Date In Windows 7 - extronics iCAM501 Operating Manual

Operating Manual
Now to set the time, simply click the set time button, it will then synchronize with the
current Windows system time, you must therefore ensure that the Windows system
time is also set correctly.

2.4.2 Setting Time and Date in Windows Vista

It is currently not possible to set the time and date of the iCAM501 using Windows
Vista. This is due to Microsoft changing its PTP driver from thatthat used with
Windows XP. The driver does still allow files to be downloaded from the iCAM501.

2.4.3 Setting Time and Date in Windows 7

As with Windows Vista the PTP driver written by Microsoft does not allow the time of
the camera to be set.
If you are running Windows 7 Professional, Enterprise or ultimate it is possible to set
the iCAM501 by downloading and using Windows XP mode. Please download
document 328303 from the iCAM501 page at www.extronics.com. This will detail how
to download, install and use Windows XP mode.
10