Haier 10515222 Operation Manual page 19

Operation
Remote controller
FRESH
POWER Operation
When you need rapid cooling, you can use this function.
Selecting of POWER operation
Press POWER/SOFT button. Every time the button is pressed,
display changes as follows:
SOFT
POWER
Stop the display at
In POWER operation status:
In COOL mode, compressor runs in high frequency
for 15 min then returns to original status setting.
To cancel POWER operation
Press POWER/SOFT button twice ,POWER/SOFT disappears.
SOFT Operation
You can use this function when silence is needed for rest
or reading.
Selecting of SOFT operation
Press POWER/SOFT button. Every time the button is pressed,
display changes as follows:
Stop the display at
In SOFT operation mode, fan speed automatically takes"ultra-low"
To cancel SOFT operation
Press POWER/SOFT button twice ,POWER/SOFT disappears.
Hints:
During POWER operation, in rapid COOL mode, the room
will show inhomogeneous temperature distribution.
Long period SOFT operation will cause effect of not too cool.
17
POWER/SOFT Operation
BLANK
SOFT
POWER
BLANK