Seagate ST118202LW Product Manual page 55

Cheetah 18 Product Manual, Rev. B
The following tables list the values of the data bytes returned by the drive in response to the Mode Sense com-
mand pages for SCSI-2/SCSI-3 implementation (see the SCSI Interface Product Manual , part number
77738479).
Definitions: DEF
CHG
Note. Saved values for OEM drives are normally the same as the default values.
Table 8: Mode sense data values (SCSI-2/3 implementation)
Bytes 00 01 02 03 04 05 06 07 08 09 10 11 12
Mode
9F 00 10 08 02 1E B3 8F 00 00 02 00
Sense
Data
Mode <------------------------------Mode Page Headers and Parameter Data Bytes---------------------------->
Page
01 DEF 81 0A C0 0C E8 00 00 00 05 00 FF FF
01 CHG 81 0A FF FF 00 00 00 00 FF 00 FF FF
02 DEF 82 0E 80 80 00 0A 00 00 00 00 00 00 00
02 CHG 82 0E FF FF 00 00 00 00 00 00 00 00 87
03 DEF 83 16 29 A0 00 00 00 14 00 00 00 D6 02
03 CHG 83 16 00 00 00 00 00 00 00 00 00 00 00
04 DEF 84 16 00 1B 32 18 00 00 00 00 00 00 00
04 CHG 84 16 00 00 00 00 00 00 00 00 00 00 00
07 DEF 87 0A 00 0C E8 00 00 00 00 00 FF FF
07 CHG 87 0A 0F FF 00 00 00 00 00 00 FF FF
08 DEF 88 12 14 00 FF FF 00 00 FF FF FF FF 80
08 CHG 88 12 B5 00 00 00 FF FF FF FF 00 00 A0[1] FF 00 00 00 00 00 00
0A DEF 8A 0A 02 00 00 00 00 00 00 00 00 00
0A CHG 8A 0A 03 F1 00 00 00 00 00 00 00 00
1A DEF 9A 0A 00 00 00 00 00 01 00 00 00 04
1A CHG 9A 0A 00 00 00 00 00 00 00 00 00 00
1C DEF 9C 0A 00 00 00 00 00 00 00 00 00 01
1C CHG 9C 0A 8D 0F 00 00 00 00 00 00 00 00
00 DEF 80 02 00 00
00 CHG 80 02 77 40
Read capacity data
02 1E B3 8E 00 00 02 00
[1] Though byte 12, bit 7 (A0) is shown as changeable, the FSW function governed by that bit is not imple-
mented by this drive.
= Default value. Standard drives are shipped configured this way.
= Changeable bits; indicates if current and saved values are changeable.
13 14 15 16 17 18 19 20 21 22 23
00 00 00
00 00 00
00 00 01 00 24 00 2C 40 00 00 00
00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 27 3D 00 00
00 00 00 00 00 00 00 00 00 00 00
03 00 00 00 00 00 00
45