Starting Windows Nt Setup - DEC AlphaPC 164 User Manual

7.7.3 Starting Windows NT Setup

Windows NT Setup, located on the Microsoft Windows NT compact disc, installs
the Windows NT operating system. Windows NT Setup provides a brief description
of the available key functions at the bottom of the screen.
During the Windows NT installation procedure, you may be prompted for the type of
computer that you have. For the AlphaPC 164 system, choose Digital AlphaPC 164.
If AlphaPC 164 is not one of the choices, then insert the Update and Windows NT
3.51 Firmware diskette. The following procedure supersedes the Starting Setup on a
RISC-Based Computer section of the Microsoft Windows NT installation guide.
To start the Windows NT Setup program, follow this procedure:
1. Insert the Windows NT compact disc in the CD-ROM drive.
2. Restart your computer.
3. From the Boot menu, choose Supplementary menu . . . .
4. From the Supplementary menu, choose Install Windows NT from CD-ROM.
5. Follow the instructions on the screen.
Note:
36 Windows NT ARC Firmware
If you have an Alpha Windows NT driver diskette for your video card,
you can use the driver to install the Windows NT operating system.
Follow this procedure:
1. Choose Custom Setup.
2. Choose display type Other, and insert the graphics disk driver when
asked for the manufacturer-supplied hardware support disk.