HP G4 Maintenance And Service Manual page 84

Notebook pc
Hide thumbs Also See for G4:
Table of Contents

Advertisement

6.
Remove the system board (3) by sliding it up and to the right at an angle.
NOTE:
the Southbridge chip located on the bottom of the board. A thermal pad is used on
the Southbridge chip (1) and the base enclosure heat sink (2) that services it. The
thermal material must be thoroughly cleaned from the surfaces of the system board and the heat
sink attached to the base enclosure each time the system board is removed. Replacement
thermal material is included with all base enclosure and system board spare part kits.
Reverse this procedure to install the system board.
76
Chapter 4 Removal and replacement procedures
System boards for use with computer models equipped with an AMD processor have

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents