Installing The Coin-Cell Battery; Removing The Input/Output (I/O) Board - Dell Latitude E5430 Owner's Manual

Installing the Coin-Cell Battery

1. Place the coin-cell battery on the system board with adhesive side downwards.
2. Connect the coin-cell battery cable to the system board.
3. Install:
a) system board
b) left support frame
c) display assembly
d) ExpressCard reader cage
e) palmrest
f) thermal module
g) right base panel
h) WLAN card
i) hard drive
j) optical drive
k) keyboard
l) keyboard trim
m) access panel
n) battery
o) ExpressCard
p) SD memory card
4. Follow the procedures in After Working Inside Your Computer.

Removing the Input/Output (I/O) Board

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) SD memory card
b) ExpressCard
c) battery
d) access panel
e) keyboard trim
f) keyboard
g) optical drive
h) hard drive
i) WLAN card
j) right base panel
k) thermal module
l) palmrest
m) ExpressCard reader cage
n) display assembly
o) right support frame
p) left support frame
q) system board
3. Remove the screws that secure the Input/Output (I/O) board in the computer.
48