Remote Control Operation
QUICKSTART
Press to LOCK
ALL Doors
Locking the Doors
Using the PowerCode Remote Control Transmitter:
Press* the
button on the PowerCode remote control transmitter. The system will lock
the doors and flash the parking lights. If the
seconds, the system will chirp the horn to confirm that the system has locked the doors.
Note: Your PowerCode system provides the added security feature of starter interrupt
whenever the doors are locked.
Unlocking the Doors
Press* the
button on the PowerCode remote control transmitter. The system will
unlock the doors and flash the parking lights. If the
within 5 seconds, the system will chirp the horn confirming that the system has unlocked
the doors. Additionally, the PowerCode system turns on the interior dome light for one
minute, or until the ignition key is turned on to provide an illuminated entry into your
vehicle.
When the doors are unlocked using the PowerCode remote control transmitter, the
system disarms the starter interrupt feature.
Convenience and Safety Features
Remote Control Power Trunk/Hatch release:
Press and hold** the
system will activate the power trunk or hatch release (if equipped) and disarm the
security system.
Note: Make sure to rearm the security system if you will be leaving your vehicle
unattended again after opening your trunk or rear hatch.
*
"Press" refers to pushing a transmitter button for approximately one second.
** "Press and Hold" refers to pushing a transmitter button for more than one second.
Press and Hold both
buttons to activate Panic
button on your PowerCode remote control transmitter. The
Press to UNLOCK
ALL Doors
Press and Hold To
Open Trunk or Hatch**
button is pressed a second time within 5
button is pressed a second time
3