JBL EVOi.sys User Manual page 14

M I X E R
INPUTS
Phantom Power
(Rear Panel)
(Master Section)
Wiring XLRs
Wiring Plugs
Unbalanced Input
Balanced Input
Unbalanced Input
Balanced Input
Insert
12
O P E R A T I O N
INPUT
CHANNEL
15
3
2
4
1
14
5
6
7
8
9
10
11
12
13
INPUT CHANNEL
(continued)
8 PAN
The control sets the amount of the channel signal feed-
PAN
ing the Mix L and R or Sub L and R busses (see
on the next page), allowing you to move the source
MIX
smoothly across the stereo image. When the control is turned
fully right or left you are able to route the signal at unity gain
to either left or right outputs individually. A mono sum of the
post-fader channel signal is also fed to the Mono output,
unaffected by the position of the
9
MUTE
All outputs from the channel except inserts and pre-fade
direct outputs are active when the
and muted when the switch is down, allowing levels to be pre-
set before the signal is required.
10
SUB
Pressing routes the channel signal to Sub L and R busses.
SUB
The channel signal will be fed proportionately to left or right
depending on the position of the
11
MIX
Pressing routes the channel signal to Mix L and R busses.
MIX
The channel signal will be fed proportionately to left or right
depending on the position of the
SUB and
control.
PAN
switch is released
MUTE
PAN control.
PAN control.