Appendix Apg6000 Connections - Baldor PG 6000 Installation & Operating Manual

Appendix A
PG6000 Connections
Caution: The brass connecting tab on some 120VAC duplex receptacles has been removed. Each
receptacle is powered by a separate generator winding. When replacing a receptacle, inspect
the brass tab that normally links both receptacles. If it is removed, be sure to remove the
brass tab from the replacement receptacle before it is installed. Failure to remove the tab will
cause a direct short to the generator windings and cause possible generator damage.
Wiring Diagrams Wiring diagrams for these generators are contained on the following pages of this appendix.
MN2418 PowerchiefR Series A‐1