Troubleshooting; Led Diagnosis - Argox A-2240 User Manual

14. After driver installation is complete, click "Close".
The driver should now be installed.
Installed printer Argox A-2240 PPLB
A Series User's Manual
65

Troubleshooting

Normally, when the printer is in not working properly, the
"Power" LED blinks continuously, and printing and
communication between the host and printer stops.

LED Diagnosis

If the Power and Ready LEDs are blinking, it means you may
have a problem. To understand the problem, please check the
Power and Ready LEDs and refer to the following solutions:
LED Indicators: Power and Ready LEDs blink at the same
tempo
Power LED Ready LED
ON ON
OFF OFF
Possible Problems Solutions
Miss-detect gap Check the label path
Check the label sensor
Label stock out Supply the label roll
Label stock not Install the label roll
installed
Label jam Recover the jam
A Series User's Manual
Remarks
If you use a
continuous label roll
and run under
Windows, select the
continuous media.
66