Vantec NexStar LX User Manual page 13

5.2. Maintenance:
Firmware Upload
To update the firmware on the NexStar LX, browse for the firmware file on your
computer and click Upload.
System Reboot
Click the Reboot button to have the device perform a software restart. The
SYSTEM LED will blink as the device restarts and then remain on if the restart
is successful. Please wait about a minute before refreshing your browser
before logging in again.
Factory Defaults
Click the Reset button to clear all configuration information and restore
default settings. Please click the Reboot button after resetting the unit.
Installation
11